IC-7300 Rig Control Version 2

This version of the IC-7300 Rig Control program is being for free, please report problems. Your feedback will help improve the program.

Instructions

Step 1 – Download the program
Download the ZIP file using the button below.

Step 2 – Extract the files
Unzip the downloaded file before running the program.

Step 3 – Connect your radio
Install the Icom USB driver if it is not already installed.
Connect your IC-7300 to the computer using a USB cable.

Step 4 – Check the COM port
Open Windows Device Manager and verify which COM port was assigned to the IC-7300.

Step 5 – Run the program
Start the program and select the correct COM port.

Step 6 – Testing
Operate the program normally and report any problems or suggestions.

This software is being provided for free, with no warranty. Use caution when transmitting and always monitor your station.

Program: IC-7300 Rig Control

Version: Version 2

Platform: Windows

File: IC7300_Install_Instructions.zip

Support this project

I’m a 78-year-old retired ham building these webpages and tools for the ham community. If you find them useful, a small donation helps keep it going.